e Marine

Canvas Tee Top Kit 160W is designed for installation on center console boat that have a soft Bimini Top. The Canvas Teetop kit is predesigned and set up for self installation, are all-inclusive there-by eliminating equipment guesswork and/or missing parts during installation. The end result is a kit that will install quickly and work once installed. There is nothing to turn on or off, everything is automatic and the batteries will be charged up and topped off ready for a full fun packed day of...

Canvas Tee Top Kit 200W is designed for installation on center console boat that have a soft Bimini Top. The Canvas Teetop kit is predesigned and set up for self installation, are all-inclusive there-by eliminating equipment guesswork and/or missing parts during installation. The end result is a kit that will install quickly and work once installed. There is nothing to turn on or off, everything is automatic and the batteries will be charged up and topped off ready for a full fun packed day of...

Fiberglass Teetop Solar Charging Kit Includes Solarland 160 Watt Panel is designed to work with a nominal 12 Volt battery system with either flooded or AGM type batteries. Fiberglass Teetop Solar Charging Kit 160W is available in two versions:--> Fiberglass Teetop Kit: Kit includes the 160W solar panel (with easy connect water resistant terminal box), four "Z" mounting brackets with hardware, 30' of 12-2 Marine grade wire, 6' of 10-2 Marine grade wire, 6 amp Charge Controller (regulates...

Fiberglass Teetop Solar Charging Kit Includes Solarland 200 Watt Panel is designed to work with a nominal 12 Volt battery system with either flooded or AGM type batteries. Fiberglass Teetop Solar Charging Kit 160W is available in two versions:--> Fiberglass Teetop Kit: Kit includes the 200W solar panel (with easy connect water resistant terminal box), four "Z" mounting brackets with hardware, 30' of 12-2 Marine grade wire, 6' of 10-2 Marine grade wire, 6 amp Charge Controller (regulates...

Hybrid kits are the best solution for renewable energy on board your vessel. The combination of solar PV power during the daytime combined with 24 hour wind capability optimizes energy production in most weather conditions. The Rutland 1200 Wind Turbine is equipped with a powerful but quiet operation of the new Tri-namic Blade that brings together low wind speed start up with high wind speed power performance and almost silent running across all wind speeds. Kits are all-inclusive allowing...

1" Stainless Steel 90 Degree Tee

Hybrid kits are the best solution for renewable energy on board your vessel.  The combination of solar PV power during the daytime combined with 24 hour wind capability optimizes energy production in most weather conditions.  Kits are all-inclusive allowing easy installation. Hybrid Wind/Solar Kit includes: 2 Solarland 85W Solar Panel (170W in total) 2 Standard Solar Panel 1" Cross Rail Mounting Kit 1 AIR Breeze Wind Generator 12V 1 e20 Solar and Wind Control Panel 12V 25 Amp 9' Wind...

Typically used with equipment requiring tie in to a shunt such as the Blue Sky IPN Pro remote controller or other similar equipment. All wire is non-refundable and is subject to a one time handling charge of $1.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.

Hybrid kits are the best solution for renewable energy on board your vessel. The combination of solar PV power during the daytime combined with 24 hour wind capability optimizes energy production in most weather conditions. Kits are all-inclusive allowing easy installation.Hybrid Wind/Solar Kit includes: - 1 x AIR Breeze 12V Wind Turbine - 2 x Kyocera 140W 12V Fixed Frame Solar Panel (280W in total)- 2 x Cross Kit for Kyocera KCM 140 - 8 x GEMINI Stainless Steel Sliding Jaw Side Mount (GEMINI...

All wire is non-refundable and is subject to a one time handling charge of $2.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.

All wire is non-refundable and is subject to a one time handling charge of $2.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.

Mast Mounting Kit: All the hardware to install your wind turbine including mast and stays. Includes the brushed aluminum 1.5" Schedule 40 (1.9"OD, 1.61" ID) mast and two 1" diameter SS stay pipes (8' long which will need to be cut based on installation needs). Also included is a hinged isolated mast base, two isolated 1" stay tie mounts and related hardware to install the mast. Each mast is e Marine fabricated to include the necessary holes for easy installation. If selected, the mast will be...

All wire is non-refundable and is subject to a one time handling charge of $2.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.

All wire is non-refundable and is subject to a one time handling charge of $2.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.

Set of 4 black rubber Solar Panel Corner Protector. Fasternes not included. It protects you from accidental cuts from the sharp corners.

Solar Fishing Pole Portable 30W Battery Charger - Harvest up to 12 A-Hr a day of energy Portable 30W Solar Fishing Pole is an easy way to keep your fishing boat batteries fully charged when not in use. The Solar Fishing Pole is a ready to operate complete solar charging system that utilizes the power from a 30 W solar PV panel that will drop into any fishing rod holder and plugs directly into the auxiliary cigarette lighter.Includes everything you need to keep your battery topped off while...

Heavy Duty Mast Mounting Kit: All the hardware to install your wind turbine including heavy duty mast and stays. Includes the Schedule 80 - 1.9" outside diameter  (1.5" ID)aluminum mast and (2) 1" diameter SS stay pipes (8' long which will need to be cut based on installation needs). Also included is a hinged isolated mast base, (2) isolated 1" stay tie mounts and related hardware to install the mast. Each mast is e Marine fabricated to include the necessary holes for easy installation....

All wire is non-refundable and is subject to a one time handling charge of $2.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.

Battery Cable #4/0 terminated with 3/8" ring lugs with heat shrink.Features- Black or Red- Meets and exceeds ABYC, COAST GUARD, NMMA specifications- Comes in different length of 6", 24", 36" or 48"

Smaller Solar PV Modules    Universal "Z" Mount Brackets Attaches to any solar module frame, perfect for curved or irregular surfaces. Kit includes four (4) Anodized Aluminum Z brackets and four (4) stainless steel bolts.

All wire is non-refundable and is subject to a one time handling charge of $2.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.

Analog Amp Meter is a panel mounted device that fits into a 2" dia. cutout and is secured in place with four mounting studs (Hardware is included).The Analog Amp Meter has a built-in shunt and just requires the series connection of the DC circuit that you wish to measure.

Brushed anodized aluminum 1.5" Schedule 40 (1.9"OD, 1.53" ID) pre-drilled mast( 8' 6" long), and two 8 foot (1") stays (used with MKW01105). Mast includes our special interior coated vibration absorption coating. Recommended for use on wind generators up to 400 Watts weighing under 30 lbs.For more information on how the mast coating work, please click here. ...