e Marine

These electric drive charging kits are plug and play systems designed for charging 96 volt systems using an AERL CoolMax SRHVW solar charge controller to regulate the solar array. There are three kits available with varying solar arrays; a 540W solar array, a 770W solar array or a 1kW solar array.These kits require a hard flat area to mount the solar panels540W Charging Kit System (MKS69620) includes- 3 Solarland 180W Solar Panels- 1 AERL CoolMax SRHVW Charge Controller- Large “Z” brackets,...

316 Grade Stainless Steel Tube 1\" Tube, 8' in length.

1" rail clamps (sold as set of 2).  These are a great hardware product for mounting almost any item to a 1 inch stainless steel rail that might be on your boat. They clamp on using a slotted captive screw and secure to your item with three mounting holes (#8).   Rail Clamp Spacer is also available.  For more information click here.

Single-stranded #10gauge green wire typically used for grounding of solar panels and wind generators. All wire is non-refundable and is subject to a one time handling charge of $1.50. All wire is sold by the foot. Be sure to add the appropriate number of feet to your shopping cart.

e10 Control PanelWind Turbine Control Panel 12V, 50A designed to work with the Silent Wind or Sunforce Generators   The e10 Wind Turbine Control Panel  It is pre-engineered to make wiring the wind turbine easy - just attach two wires from your battery  and two wires from the turbine to the large clearly labeled terminals. It could not be simpler. The flush mount panel includes a pre-wired "Stop / Run Switch" with noise suppressors, Digital Power-Energy Meter (displays Voltage,...

100 Amps Inverter Hookup Kits, available in 24", 48", or 60"These kits make hooking up the DC (32VDC max) side of your inverter easy and professional. All cables are pre-terminated with large 3/8 inch diameter hole lugs. The kit is Marine grade making it distinct from other products found on the market.Each kit includes:* 100A ANL Fuse* Fuse block with cover* 12" long Red #4 cable for fuse connect* Red #4 cable at selected kit length* Black #4 cable at selected kit length ...

Rail Kit Spacer (Pair)- These are noncorrosive spacers that are used to raise the height of the rail clamps off of the rail bars providing clearance for the mounting bar over the top of the junction box on the backside of the solar panel.MHE94700   1" Rail Clamps (Pair)MHE94715   0.75" - 1.25" Adjustable Rail Clamps (Pair) ...

MTS70 Power Energy Meter w/100A Shunt The Power Energy Meter (PEM) is a unique, 2 inch round, marine grade energy meter designed to monitor power and energy production of onboard renewable energy devices, such as solar panels and wind turbines. e Marine is pleased to offer the MTS-70, Marine industries first power-energy meter capable of monitoring energy produced by onboard systems such as wind turbines and solar panels. Exclusively developed to our specifications this meter monitors battery...

100 Amp, panel  mount, red on/off/reset lever

MTS70 Power Energy Meter w/ 150A Shunt The Power Energy Meter (PEM) is a unique, 2 inch round, marine grade energy meter designed to monitor power and energy production of onboard renewable energy devices, such as solar panels and wind turbines. e Marine is pleased to offer the MTS-70, Marine industries first power-energy meter capable of monitoring energy produced by onboard systems such as wind turbines and solar panels. Exclusively developed to our specifications this meter monitors battery...

\N

150 Amps Inverter Hookup Kits, available in 24", 48", or 60"These kits make hooking up the DC (32VDC max) side of your inverter easy and professional. All cables are pre-terminated with large 3/8 inch diameter hole lugs. The kit is Marine grade making it distinct from other products found on the market.Each kit includes:* 150A ANL Fuse* Fuse block with cover* 12" long Red #4 cable for fuse connect* Red #4 cable at selected kit length* Black #4 cable at selected kit length ...

200 Amps Inverter Hookup Kits, available in 24", 48", or 60"These kits make hooking up the DC (32VDC max) side of your inverter easy and professional. All cables are pre-terminated with large 3/8 inch diameter hole lugs. The kit is Marine grade making it distinct from other products found on the market.Each kit includes:* 200A ANL Fuse* Fuse block with cover* 12" long Red #2/0 cable for fuse connect* Red #2/0 cable at selected kit length* Black #2/0 cable at selected kit length ...

Hybrid kits are the best solution for renewable energy on board your vessel.  The combination of solar PV power during the daytime combined with 24 hour wind capability optimizes energy production in most weather conditions.  Kits are all-inclusive allowing easy installation.Hybrid Wind/Solar Kit includes:- 1 x AIR Breeze 12V Wind Turbine - 2 x Solarland 100W 12V Fixed Frame Solar Panel (200W in total)- 2 x Cross Kit for Solarland 100W- 8 x GEMINI Stainless Steel Sliding Jaw Side...

Hybrid kits are the best solution for renewable energy on board your vessel.  The combination of solar PV power during the daytime combined with 24 hour wind capability optimizes energy production in most weather conditions.  Kits are all-inclusive allowing easy installation.Hybrid Wind/Solar Kit includes:- 1 x Air Silent X 12V Marine Wind Turbine- 2 x Solarland 100W 12V Fixed Frame Solar Panel (200W in total)- 2 x Cross Kit for Solarland 100W- 8 x GEMINI Stainless Steel Sliding Jaw...

Hybrid kits are the best solution for renewable energy on board your vessel. The combination of solar PV power during the daytime combined with 24 hour wind capability optimizes energy production in most weather conditions. Kits are all-inclusive allowing easy installation.Hybrid Wind/Solar Kit includes:- 1 x Air Silent X 12V Marine Wind Turbine- 2 x Solarland 150W 12V Fixed Frame Solar Panel(300W in total)- 2 x Cross Kit for Solarland 150- 8 x GEMINI Stainless Steel Sliding Jaw Side Mount...

10'  Battery Extension   Kit (120A,  12-48VDC) This kit makes extending connections to a battery easy (48VDC max). All cables are pre-terminated with large 5/16" diameter hole lugs.  Included is a two post terminal block for easy matting to your existing wires.Excellent solution for use with e Propulsion NAVY and ELCO electric drives where supplied battery interconnects prove to short for installation needs.  The kit is Marine grade making...

300 Amps Inverter Hookup Kits, available in 24", 48", or 70"These kits make hooking up the DC (32VDC max) side of your inverter easy and professional. All cables are pre-terminated with large 3/8 inch diameter hole lugs. The kit is Marine grade making it distinct from other products found on the market.Each kit includes:* 300A ANL Fuse* Fuse block with cover* 12" long Red #4/0 cable for fuse connect* Red #4/0 cable at selected kit length* Black #4/0 cable at selected kit length ...

Kit includes: Kyocera 210 Watt Solar Panel Solar Boost 1524iX and wall mount box Cable Clam MC4 Male Connector MC4 Female Connector ATC Fuse Holder and 20A Fuse 10-2 wire (40 feet) Black Cable Bushing Crimps Small Z Bracket Kit+ includes: Kyocera 210 Watt Solar Panel Solar Boost 2512iX and wall mount box IPN Remote Display Cable Clam MC4 Male Connector MC4 Female Connector ATC Fuse Holder and two 20A Fuses 10-2 wire (40 feet) with MC Connectors Black Cable Bushing Crimps Small Z Bracket ...

400 Amps Inverter Hookup Kits, available in 36", 48", or 70"These kits make hooking up the DC (32VDC max) side of your inverter easy and professional. All cables are pre-terminated with large 3/8 inch diameter hole lugs. The kit is Marine grade making it distinct from other products found on the market.Each kit includes:* 400A ANL Fuse* Fuse block with cover* 12" long Red #4/0 cable for fuse connect* Red #4/0 cable at selected kit length* Black #4/0 cable at selected kit length ...

Featuring the hardware required to provide a mounting place for a second solar panel between stanchions Kit includes: 72' long 1" stainless steel tube with SS end fitting drilled bars to attach tube to stanchion U-bolts for attachment to the stanchions tubes Cap nuts to cover U-bolt threads Includes 80W solar panel (SOL50072 skinny solar panel) and 10-2 marine grade wire e Marine includes rubber corner proctectors for all solar panels sold in our kits. These protectors remove the metal corners...

Featuring the hardware required to provide a mounting place for solar panels between stanchions

Junction Box Kit used with up to 2 solar panels that have flying leads connections instead of the traditional junction box.The kit includes all the components necessary to make your connections into the water resistant enclosure. This eliminates using the factory connectors provided with the solar panel which typically require expensive mating connectors./p>The Junction Box Kit is designed to support the connection of two solar panels together into a single junction box up to...

Need to add a USB power socket on board your boat or RV? This is an excellent kit to solve the problem quickly and easy.  It  mounts on to any flat surface up to 1" thick by simply drilling a 1-1/8" hole.The socket has two USB outlets and is  powered from a 12 VDC source. Included in the kit are  the necessary crimps, fuse holder and fuse required for the installation. Simply add some short pieces of wire and the USB outlet is ready the power of all those energy hungry...