Morningstar

TriStar controllers are technically advanced and professional solar battery chargers and load controllers.  This version of the display  is mounted on the controller locally and designed to work with the Morningstar TS or TS-MPPT 45 or 60 controllers. If a remote display is needed, see the TS-RM-2 /CCM345750. The TriStar meters can be added to the controller when it is first installed, or at anytime after the controller has been in service. The meter will display a great deal of...

Morningstar 300W 12V Pure Sine Wave Inverter is designed specifically for remote off-grid photovoltaic (PV) systems.  The Morningstar 300W 12V Inverter is very reliable because of it's extensive electronic protections that will automatically protect against short circuits, overload, high temperature and low voltage disconnect. The Morninstar Pure Sine Wave Inverter automatically powers down to stand-by mode, reducing self-consumption, so more power is...

TWO FOR ONE: The SunSaver Duo is an advanced PWM dual-battery bank charge controller for boats, RV's and other installations that require simultaneous battery charging of two separate (isolated) batteries. The controller features a solar input connection and two battery connections. A status LED indicates charging progress and controller operating state. Battery charging and operating parameters are adjusted using five (5) Setting DIP switches. The SunSaver Duo also features self-diagnostics...

Compatible With: SunSaver Duo controller SunSaver MPPT controller SureSine inverter Model Numbers RM-1 Key Features and Benefits Provides Important Information Easy to Install Easy to Use Low Self-Consumption: Backlight off 6mA Backlight on 15mA Mount in the wall or on the wall Adjustable Settings ...

Morningstar Model SUNSAVER SS-10-12V This is one of eight versions in the SunSaver product line manufactured by MorningStar, one of the world's leading small solar controller manufacturers for both professional and consumer applications. This model is rated at 10 amps and is designed to operate on a normal 12 V DC battery system. It regulates the current  from the solar panels (approximately 110 W) into your battery protecting it from overcharges. It is  100% solid state...

Morningstar Model SUNSAVER SS-10L-12V This is one of eight versions in the SunSaver product line manufactured by MorningStar, one of the world's leading small solar controller manufacturers for both professional and consumer applications. This model is rated at 10amps and is designed to operate on a normal 12 V DC battery system. It regulates the current  from the solar panels (approximately 110 W) into your battery protecting it from overcharges. It is  100% solid state design,...

Morningstar Model SUNSAVER SS-10L-24V This is one of eight versions in the SunSaver product line manufactured by MorningStar, one of the world's leading small solar controller manufacturers for both professional and consumer applications. This model is rated at 10 amps and is designed to operate on a normal 24 V DC battery system. It regulates the current  from the solar panels (approximately 110 W) into your battery protecting it from overcharges. It is  100% solid state...

Morningstar Model SUNSAVER SS-6L-12V This is one of eight versions in the SunSaver product line manufactured by MorningStar, one of the world's leading small solar controller manufacturers for both professional and consumer applications. This model is rated at 6 amps and is designed to operate on a normal 12 V DC battery system. It regulates the current  from the solar panels (approximately 80 W) into your battery protecting it from overcharges. It is  100% solid state design,...

The RTS is recommended whenever the temperature of the battery varies more than 5°C (9°F) during the year. This option can be used with the following models:  ProStar, TriStar, Sunkeeper, SunSaver Duo and SunSaver MPPT.

Morningstar’s advanced SunLight solar lighting controller combines the SunSaver design with a microcontroller for automatic lighting control functions.    This technology provides: • Proven Reliability• Precise Lighting Control• PWM Battery Charging Model Numbers SL-20L-12V Operation: • Rotary digital switch to select among 10 lighting options (see back)• Test button flashes red LED to confirm correct rotary switch selection• Test button turns...

Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller 6 Amp 12 Volt Model Numbers SK-6 Operation: • Rotary...

Morningstar TriStar  solar charge controllers are technically advanced and professional solar battery chargers and load controllers. This optional  digital LCD meter is desiged to be mounted in a remote location  and works with the TS or TS-MPPT 45 or 60. This remote meter is provided with a mounting plate and 30m (98.4 ft) of cable. It is identical to the TS-M-2  local meter version except that the TS-RM-2 version can be mounted at some distance from the controller. The...

Morningstar’s advanced SunLight solar lighting controller combines the SunSaver design with a microcontroller for automatic lighting control functions.    This technology provides: • Proven Reliability• Precise Lighting Control• PWM Battery Charging Model Numbers SL-10L-24V Operation: • Rotary digital switch to select among 10 lighting options (see back)• Test button flashes red LED to confirm correct rotary switch selection• Test button turns...

Morningstar’s MeterHub (HUB-1) allows multiple Mornings tar products to communicate over a Meterbus network to provide improved data m onitoring, additional capabilities and lower system cost.   • Enables multiple controllers to share a single TriStar meter and display both single controller data (TriStar #1, TriStar #2...) as well as aggregated data fo r the entire system.  • Enables multiple controllers to share a single Relay Driver and fully utilize all 4 channels of the...

Low-cost, rugged and simple solar charging controller solution. The sealed unit requires no adjustment and works with a nominal 12 volt DC battery system. It can handle up to 4 1/2 amps of solar charging current (approximately 60 W, but check the exact rating of your solar panel). Unit also protects the battery at nighttime from reverse discharge of the solar panel load. Key Features and Benefits Series design (not shunt) 100% solid state True 0 to 100% PWM duty cycle Setpoint accuracy to 60...

The USB MeterBus Adapter™ (model: UMC-1) converts the Morningstar MeterBus RJ-11 electrical interface to a standard USB 2.0 interface which allows communication between a PC and a Morningstar charge controller or inverter. The UMC-1 may be used with any Morningstar controller or inverter equipped with a meter connection that does not also already have a RS-232 port. Compatible Morningstar products include: ProStar MPPTSunsaver MPPTProStar (Gen3)SunSaver DUOSureSineDATASHEETMANUAL ...

SunLight 20 Amp 24 Volt Solar Lighting Controller The solar lighting controllers can be used in conjunction with other charging sources, however the SL controllers *DO* require at least a 1-watt solar panel on the input side to detect dark & light conditions. Morningstar's advanced SunLight solar lighting controller combines the SunSaver design with a microcontroller for automatic lighting control functions. 10 and 20 amp and 24 volt versions available. Rotary digital switch to select among 10...

Morningstar ProStar MPPT Wire Box The Morningstar ProStar MPPT wire box is an optional accessory. It is only compatible with the ProStar MPPT solar charge controllers. The wire box allows you to connect larger gauge wire to the charge controller. The ProStar MPPT controllers can accept up to #6 AWG without the wire box and up to #2 AWG with the wire box. It also provides electrical knock-outs for connecting conduit to route your wires. Some of the available controller accessories will also...

MorningStar ProStar MPPT Solar Controller 25A or 40A/ 12V or 24V The NEW ProStar MPPT™ is a mid-range MPPT solar charge controller with TrakStar Technology™ that provides maximum power point tracking (MPPT) battery charging for off-grid photovoltaic (PV) systems up to 1100 watts. This device is ideal for industrial and residential applications. This controller allows multiple modules in series for 12V and 24V battery systems. Detailed battery programming options allow for advanced battery...

Morningstar’s TriStar TS-MPPT-45 and -60 MPPT solar controllers with TrakStar Technology are advanced maximum power point tracking (MPPT) battery chargers for photovoltaic (PV) systems up to 3kW. Both controllers can be used with arrays with a maximum open circuit voltage of 150 VDC and charge batteries between 8 and 72 VDC. A remote temperature sensor is included. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to...

Morningstar’s TriStar TS-MPPT-45 and -60 MPPT solar controllers with TrakStar Technology are advanced maximum power point tracking (MPPT) battery chargers for photovoltaic (PV) systems up to 3kW. Both controllers can be used with arrays with a maximum open circuit voltage of 150 VDC and charge batteries between 8 and 72 VDC. A remote temperature sensor is included. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to...