Xantrex Parts & Accessories

Freedom X / XC Remote Panel with 25' Cable Freedom X / XC Remote Panel with 25' Cable for Freedom X and Freedom XC Inverters Connect with Bluetooth: View key system information via FXC Control app on your smartphone or tablet Configure and monitor important parameters and settings Fault and error codes Compatible with all FREEDOM X, XC, XC PRO models in 120Vac/60Hz or 230Vac/50Hz models Part Numbers: Remote (No Bluetooth): 808-0817-01 Bluetooth Remote: 808-0817-02 Freedom X / XC...

Xantrex, 710-0010, MPPT Charge Controller Remote Panel w/ 25' Cable. The Xantrex Solar 710-0010 MPPT Remote Panel provides remote monitoring and setting of Xantrex Solar MPPT Charge Controller parameters. The 710-0010 remote's LCD panel displays real-time system data including PV array voltage, amps, and watt-hours, as well as battery voltage and temperature from a remote location. Includes 25ft cable for remote mounting.OWNER'S GUIDE ...

Xantrex Freedom Remote Control Panel  Freedom Remote Control Panel (Compatible with SW2012, SW3012, SW2024 and SW3024 models), will dramatically enhance the features and functions of Inverter/Charger system. As part of its suite of upgradeable accessories, the Xantrex System Control Panel provides full system configuration and diagnostic capability.Xantrex has been developing a NMEA 2000™ and RV-C compatible networking protocol that will implement networking into inverter/charger...

FREEDOM SW Remote Adapter(Phone cable to Xanbus)The Freedom SW Remote Adapters (TEL to Xanbus cable) allow Xanbus-enabled devices to establish a Xanbus network using a 4 pin RJ11 (a regular telephone cable) or a 6 pin RJ12 cable (a Xantrex remote cable) that comes supplied and installed in many recreational vehicles and in pleasure crafts.  One adapter is red and the other is black. When installing the Xantrex Freedom SW inverter/charger, normally a new Xanbus network cable (CAT5...

FREEDOM SW Remote PanelFeaturesSimple ON/OFF switch to operate your Freedom SW Inverter/ChargerCompatible with all models of the Freedom SW Inverter/Charger SeriesFacilitates ignition lockout feature of the Freedom SW to prevent unnecessary battery drainThe Freedom Remote Panel (remote panel) can be connected to the Freedom SW Inverter via the Remote port on the AC/DC side panel to turn the Freedom SW Inverter ON or OFF from a more convenient location. The remote panel also has the ability to...

The PROsine Remote Interface Panel (Part # 808-1800) allows standard Xantrex Sine Wave Inverter LCD Display Panel to be mounted remotely in the location of your choice.  It comes with 30' (10m) of telephone cable.The PROsine Remote Interface Panel (Part # 808-1800) is for use with all models of PROsine 1000 & 1800 Inverter models.Features:Standard Telephone Jack Outlet for connection to LCD panelLED indicator for basic status monitoringON/Bypass switchMounts into the existing cavity in...

The Freedom 458 Basic Remote PanelThe Freedom Remote Control Panel allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. With controls that can be accessed directly from the front panel, it is easy to read, operate and install. Product Features  Independent invert and charge on/off controls Push button control of power sharing, equalizing, battery set-up Multi-colored LED displays battery state...

Replacement Panel for Xantrex Freedom HF Series Inverter/Chargers

Freedom X GFCI Option Freedom X GFCI Option Ground Fault Circuit Interrupter enables to plug electronics directly on the inverter/charger. Freedom X GFCI: Freedom X GFCI Device Installation Guide" ...

Temperature or Temp Sensor for Freedom SW Series Inverter Chargers is a Xantrex part available by e Marine Systems.  Please contact us if assistance is required, we'll be glad to assist you. Manufacturer part # 809-0946 ...

Xantrex 31 6257 00 Remote Panel Cable 25 inch - 26awg 6 conductor for use withnFreedom Basic Remote On/Off Panel The 31-6257-00 25' Remote Panel Cable for Xantrex is available at e Marine Systems. If further assistance is necessary, please contact us to gladly help you. Manufacturer part # 31-6257-00 ...

Freedom SW Stacking Cable Remote Adaptor allows Freedom SW Inverter/Chargers to communicate via existing phone cord.Compatible with Freedom Inverter/Chargers Part # 815-2012, 815-2024, 815-3012, 815-3024.Manufacturer #: 808-9005

Xantrex Battery Temperature Sensor is designed for use with XC, XPLORE  and TRUECHARGE2 Battery Chargers. Part # 808-0232-01 It sends precise temperature  information to the charger, which automatically adjusts voltage to ensure full battery charge depending on the ambient temperature of your battery installation. ...