Gas Detectors

CruzPro GD20B Gas Vapor Monitor detects gas vapors at 10%, 20% or 30% of the concentration required for an explosion (LEL or Lower Explosive Limit). The GD20 uses new technology to lower the power requirements for the sensor and the GD20 can be programmed to put itself to sleep for further power conservation. The GD-20 Gas Vapor Detector can be programmed to be active continuously or wake up every 5 minutes for a sniff. If the GD-20 senses a dangerous concentration of gas, it sounds the alarm,...

Spare gas sensor assembled with 16-ft cable (5 meters) for use with GD-20B and GD-25 gas detector meters.Model#  GD-27 CruzPro GD-20B Information: CruzPro GD-20B Manual ...

CruzPro GD55 Gas Vapor Monitor uses new technology to lower the power requirements for the sensor and draws only 0.12 amps at 12VDC. The GD-55 gas detector comes with one LPG/Petrol/Gasoline sensor with 5 meters (16 feet) of cable. Installation into a round 2.4" diameter (55mm) hole requires only a screwdriver. An instruction manual and all mounting hardware is provided Model# GD-55R Round GD-55S Square GD55 Marine Gas Detector Specifications: Operating Voltage:  10.5 - 16.0...

SCAD PT90 Propane Timer Control is a programmable timer that can turn a propane solenoid off after a set amount of time in 10 minute increments up to 90 minutes. While the PT90 was designed for a propane solenoid, it can be used to control other 12 to 24 VDC devices that draw 1 amp or less. SCAD PT90 Features: Automatically shuts a propane solenoid off after a set amount of time up to 90 minutesTime is adjustable in 10 minute increments by holding the "On" touch...