Engine Instruments

CruzPro OP60 Oil Pressure Gauge unique, low and high pressure alarms. NMEA 0183 Data Output.Preprogrammed for popular senders from VDO, Teleflex, Faria, etc. The OP-60 Oil Pressure Gauge displays engine oil pressure in Psi or Bars. Model#: OP-60R Round OP-60S Square OP60 Digital Oil Pressure Gauge Specifications: Supply Voltage:  9.5 - 33.0 VDC  Current Drain:  0.018 amps nominal Display:  4 digit LCD, 5 levels of backlighting Data:  Oil Pressure, 0 to 75, 0 to...

CruzPro PY60 Digital Pyrometer Gauge is a low Cost Pyrometer -20 deg C to 1100 deg C. It comes complete with K-type thermocouple. NMEA 0183 data output. The PY-60 displays engine exhaust gas temperature in degrees F or C. Model#: PY-60R Round PY-60S Square CruzPro PY60 Digital Pyrometer Gauge Specifications: Supply Voltage:  9.5 - 33.0 VDC  Current Drain:  0.018 amps nominal Display:  4 digit LCD, 5 levels of backlighting13 levels of display damping...

CruzPro RH110 Digital RPM Engine Hours Elapsed Time Gauge is an accurate Engine RPM Monitor with built in setable Alarms, max RPM memory, engine hours, elapsed trip time with NMEA 0183 data output.The RH-110 works with any engine and can be driven from a wide range of signal frequencies and amplitudes.Model# RH-110CruzPro RH110 Specifications:Operating Voltage: 9.50 - 33.00 VDC Current Drain: 0.035 amps nominal Display: Large 4 digit LCD, 5 levels of backlighting with external backlight on/off...

CruzPro RH60 RPM Engine Hours & Elapsed Time Gauge accurate engine RPM monitor with built in setable Alarms, max RPM memory, engine hours, elapsed trip time. NMEA 0183 data output and works with any engine and can be driven from a wide range of signal frequencies and amplitudes. The RH-60 is a four digit digital display of engine RPM, total engine hours, elapsed trip time and maximum r.p.m. seen. Model#: RH-60R Round RH-60S Square RH60 Digital RPM Engine Hours & Elapsed Time Gauge...

CruzPro SB2 Dual Sender Buffer allows a CruzPro gauge (FU30/FU60, TL25/TL55, OP30/OP60, etc.) and one existing analog gauge to share a single station 10-180 ohm or 240 -33 ohm sender.  The SB2 Dual Sender Buffer Makes adding a digital gauge to an existing analog set-up very easy. One SB-2 will buffer two separate senders (e.g. an oil pressure and water temperature sender, etc.). Model# SB-2 SB2 Dual Sender Buffer Specifications: Supply Voltage:  10.5 to 33.0...

CruzPro T60 Digital Water Temperature Gauge displays engine oil or water temperature in degrees F or C. The T-60 has built-in calibration curves for most popular temperature senders manufactured by VDO, Teleflex, Faria, Stewart-Warner and others (sender not provided). When activated, the built-in 85 dB alarm will sound and the display will flash. The T60 alarms can be enabled or disabled with a single key press. Also, the CruzPro T60Digital Water Temperature Gauge draws only 0.017...