Watt&Sea

4:1 lifting and lowering hoist This hoist will facilitate handling at sea while lowering or lifting the hydrogenerator. It includes : 6 meters of 6 mm diameter polyester rope spliced to the block1 x 40 mm diameter fiddle/becket/jammer block1 x 40 mm diameter fiddle block2 x spring clips2 meters of 5 mm red polyester rope (lowering)2 meters of 5 mm blue polyester rope (lifting) Reference : PA-04 ...

Even lighter, more manageable, more hydrodynamic and corrosion resistant.  Result of experience, the new generation of Cruising hydrogenerators and its new features meet the requirements of users, boatbuilders and installers: Available in 2 outputs, 300 or 600 Watts, and 2 lengths, 610mm (24") or 970mm (38") "Brushless" technology and same material on any model Converter 12-24 Vcc auto-detected with an advanced electronic architecture New bracket with its cam positioned closer to the...

Even lighter, more manageable, more hydrodynamic and corrosion resistant.  Result of experience, the new generation of Cruising hydrogenerators and its new features meet the requirements of users, boatbuilders and installers: Available in 2 outputs, 300 or 600 Watts, and 2 lengths, 610mm (24") or 970mm (38") "Brushless" technology and same material on any model Converter 12-24 Vcc auto-detected with an advanced electronic architecture New bracket with its cam positioned closer to the...

Even lighter, more manageable, more hydrodynamic and corrosion resistant.  Result of experience, the new generation of Cruising hydrogenerators and its new features meet the requirements of users, boatbuilders and installers: Available in 2 outputs, 300 or 600 Watts, and 2 lengths, 610mm (24") or 970mm (38") "Brushless" technology and same material on any model Converter 12-24 Vcc auto-detected with an advanced electronic architecture New bracket with its cam positioned closer to the...

Even lighter, more manageable, more hydrodynamic and corrosion resistant.  Result of experience, the new generation of Cruising hydrogenerators and its new features meet the requirements of users, boatbuilders and installers: Available in 2 outputs, 300 or 600 Watts, and 2 lengths, 610mm (24") or 970mm (38") "Brushless" technology and same material on any model Converter 12-24 Vcc auto-detected with an advanced electronic architecture New bracket with its cam positioned closer to the...

Specifications: It is light weight, built with robust materials,  compact and easy to install. Minimal maintenance is required. Effective at speeds ranging from 3 to 20 knots, its simple assembly is carried out on the transom thanks to a lifting system found on sailboat rudders. Power : 120W at 5 knots (10A - 12V  or  5A -24V) that's an incredanle 240 amp-hrs a day!                       500W at 8 knots (40A -12V ...

Specifications: It is light weight, built with robust materials,  compact and easy to install. Minimal maintenance is required. Effective at speeds ranging from 3 to 20 knots, its simple assembly is carried out on the transom thanks to a lifting system found on sailboat rudders. Power : 120W at 5 knots (10A - 12V  or  5A -24V) that's an incredanle 240 amp-hrs a day!                       500W at 8 knots (40A -12V ...

The RACING model is the patented and industrialized version of the prototypes developed for the round the world race Vendée Globe 2008. This model is particularly suited to performance and racing yachts. Specifications: Effective on a range of speed from 7 to 25 knots, it is equipped with a variable pitch propeller electronically controlled by an autonomous and miniaturized processor: the drag is minimized and the energy output optimized. A hydraulic pump allows the control of the...

The RACING model is the patented and industrialized version of the prototypes developed for the round the world race Vendée Globe 2008. This model is particularly suited to performance and racing yachts. Specifications: Effective on a range of speed from 7 to 25 knots, it is equipped with a variable pitch propeller electronically controlled by an autonomous and miniaturized processor: the drag is minimized and the energy output optimized. A hydraulic pump allows the control of the...

Watt & Sea Adjustable Pitch Propeller 200mm has been designed for high speed sailing boats, equipped with a Cruising hydrogenerator. The blades are the same as the one used with the Racing propeller, the difference is their position which is done manually (unlike the Racing model which use an hydraulic pump for this adjustment). Adjustable Pitch Propeller 200mm Features: 1 composite hub3 High-Tech composite blades (strength validated on the Vendée Globe)3 grub screws for the blades...

Watt & Sea larger propeller 11" (280mm) Recommended for low speed cruising sailboats  Manufacturer part number: WS-P-CL-001

Watt & Sea Standard propeller 9.45" (240mm) Recommended for low speed cruising sailboats  Manufacturer part number: WS-P-C-001

Watt & Sea Standard propeller 7.87" (200mm) Recommended for low speed cruising sailboats  Manufacturer part number: WS-P-CS-001

The Watt and Sea Universal Support Mount is the ideal solution for vertical or leaning transoms. It allows to compensate an angle from + and - 45°. The Universal Support Mount is aesthetic, strong and is made of e-polished stainless steel. Check out the short video clip  Manufacturer#: FU-03 More detailed information: Fitting Instructions 2D Drawing ...

This removable support kit enables to move the hydrogenerator easily from one side to the other depending on the sailing tack thus having an optimum production thanks to the permanent immersion of the propeller. This fitting system is also dedicated at the mooring or at the marina to be moved easily and quickly in that case we recommend the using of the IP68 waterproof connection kit ref WS-PL-C-001   More detailed information: Sales Sheet ...