Products 1-19 of 19
Show
Availability: In Stock
Balmar
Item #: ATB73012 -
The Balmar APM provides best-in-class surge protection using the latest technology developed for the automotive industry. It can protect alternators from damaging effects:• Battery switch disconnects• Lithium battery BMS disconnects• Surges from solenoids, combiners, starters and other motors.
The Balmar APM excels in both short duration and longer duration spikes, where other products fail.
DATA SHEET ...
Availability: Back Order
Balmar
Item #: ATB52054 -
Balmar Alternator Temperature Sensor MC-TS-A 54" length, when use with Max Charge and ARS-5 regulators, alternators, helps increase the system response and protection by enabling regulators to respond to ambient heat conditions.The Balmar Alternator Temperature Sensor MC-TS-A can monitor the alternator and respond if ambient temperature conditions are detected, reduce the amperage output and horsepower load on the engine and belts, giving the alternator the chance to cool down to normal...
Availability: Back Order
Balmar
Item #: ATB72012 -
Balmar AltMount Serpentine Belt 48-B-41
AltMount Serpentine Pulley 48-B-41 Specs: Ten-Groove (J10) Serpentine 41″ Circumference
Availability: Back Order
Balmar
Item #: ATB72013 -
Balmar AltMount Serpentine Belt 48-B-42
AltMount Serpentine Pulley 48-B-42 Specs: Ten-Groove (J10) Serpentine 42″ Circumference
Availability: Back Order
Balmar
Item #: ATB72014 -
Balmar AltMount Serpentine Belt 48-B-43
AltMount Serpentine Pulley 48-B-43 Specs: Ten-Groove (J10) Serpentine 43″ Circumference
Availability: Back Order
Balmar
Item #: ATB72047 -
Balmar AltMount Serpentine Pulley 48-YP-FT.Fixed Tachometer Alternator Pulley
AltMount Serpentine Pulley 48-YP-FT Specs: Ten-Groove (J10) Serpentine 3.3″ Diameter 17mm Bore
Availability: Back Order
Balmar
Item #: ATB52055 -
Balmar Battery Temperature Sensor MC-TS-B when used in conjunction with Balmar Max Charge or ARS–5 voltage regulators, the Balmar Battery Temperature Sensor MC-TS-B allows the voltage regulator to monitor and automatically compensate for changes in ambient battery temperature.Detailed installation instructions for the Balmar Battery Temperature Sensor MC TS B can be found in the regulator manual or at www.balmar.netTemperature Sensor, Battery 20 ft Length. ...
Availability: Back Order
Balmar
Item #: ATB72017 -
Balmar BBU Universal Belt Buddy Mechanism for Any Adjustment Arm. This product is designed to fit on your existing tensioning arm, thereby converting it to our Belt Buddy System.
Does not come with the Balmar Universal Adjustment Arm (UAA).
Caution: This approach sacrifices some “travel” in the existing adjustment arm so the BBU mechanism can be anchored to the arm. Make certain your alternator mounting does not need this travel before purchasing the BBU. ...
Availability: Back Order
Balmar
Item #: ATB59601 -
Balmar TSP-12 Transient Spike Protector (Zap Stop) build in an additional level of system safety by ensuring an exit corridor to ground should an AC or DC spike invade the vessel’s charging system.The Balmar TSP-12 fused sacrificial diodes are designed to fail before alternator diodes can be damaged and is designed for a 12 Volt DC Charging System.
Availability: Back Order
Balmar
Item #: ATB59603 -
Balmar TSP-24 Transient Spike Protector (Zap Stop) build in an additional level of system safety by ensuring an exit corridor to ground should an AC or DC spike invade the vessel’s charging system.The Balmar TSP-24 fused sacrificial diodes are designed to fail before alternator diodes can be damaged and is designed for a 24 Volt DC Charging System.
Availability: Back Order
Balmar
Item #: ATB72021 -
Balmar UAA Universal Adjustment Arm for the Belt Buddy provides a longer, more positive arm for alternator adjustment.The Belt Buddy Mechanism which goes with the UAA is part number BB, grouped together the set is part number UBB.The Belt Buddy Mechanism which goes with most any adjustment arm is part number BBU.The UAA is 10.3″ long and the adjustment slot provides up to 4.5″ of travel. The adjustment slot is 0.53″ wide.Note: This part number is for the “Arm Only”, It does not come with the...
Availability: Back Order
Balmar
Item #: ATB72016 -
Balmar UBB Belt Buddy Kit includes the Universal Adjustment Arm (UAA) and Belt Buddy Mechanism (BB).
To utilize only the adjustment mechanism with an existing adjustment arm, purchase part number BBU.
Caution: This approach sacrifices some “travel” in the existing adjustment arm so the BBU mechanism can be anchored to the arm. Make certain your alternator mounting does not need this travel before purchasing the BBU ...
Availability: Back Order
Balmar
Item #: ATB53150 -
Balmar 1014 Wiring Harness 7 97 98 Series 12V with ring terminals on field/stator wires, compatible with the 7, 97 and 98 Series of 12 Volts, is availble and ready to ship worldwide.
...
Availability: Back Order
Balmar
Item #: ATB72053 -
Balmar Smartgauge 44-SG-12/24 Battery Monitor provides accurate, dependable information about battery condition, without the need for shunts and complicated programming. Simply select the battery program that most closely matches your battery technology.
Balmar Smartgauge 44-SG-12/24 Features:An Advanced Battery Fuel GaugeMonitors State-of-Charge Percentage (SoC%) and Voltage of the Primary BatteryMonitors Voltage of a Second BatteryNo Shunt RequiredSelf-CalibratingAccurate within 5% after...
Availability: Back Order
Balmar
Item #: BMB10200 -
Balmar SG200 Battery Monitor provides provides continuous information on various parameters of a battery or battery-bank, and of direct current (DC) usage in the system. Balmar has combined recent technology advances to introduce a next generation battery monitor. The SG200 is quite simply the most accurate battery monitor available today. Balmar has combined the best features of its 1st generation SmartgaugeTM with many advantages of a shunt-based amp-hour counting system. Further, we’ve...
Availability: Back Order
Balmar
Item #: BMB10205 -
Balmar SG200 SmartShunt is optional for Monitoring a Second Deep Cycle Bank. Includes the SG2-0400 Communications Cable (10 meters).Part number:SG200-0100 Balmar SG200 Information: Balmar SG200 Manual Balmar SG200 Catalog ...
Availability: Back Order
Balmar
Item #: BMB10210 -
Balmar SG200 Color Display is an optional 2 1/16″ Color Display. It adds a Color Display to an existing SmartLink Network.
Requires the Purchase of the SG2-0400 Communications Cable.
Part Number:
SG200-0200 Balmar SG200 Information: Balmar SG200 Manual Balmar SG200 Catalog ...
Availability: Back Order
Balmar
Item #: BMB10215 -
Balmar SG200 Bluetooth Gateway is optional for Smartphone Monitoring. Connect to Any Open Port on the SmartLink Network.
1 Meter (39″) Tether.
Part Number:
SG200-0300 Balmar SG200 Information: Balmar SG200 Manual Balmar SG200 Catalog ...
Availability: Back Order
Balmar
Item #: BMB10220 -
Balmar SG200 SmartLink Communications Cable is Optional SmartLink Communications Cable (10 meters).
For Longer Runs or Adding a Color Display (SG2-0200).
Part Number:
SG200-0400 Balmar SG200 Information: Balmar SG200 Manual Balmar SG200 Catalog ...