e Marine

400 Amps Inverter Hookup Kits, available in 36", 48", or 70"These kits make hooking up the DC (32VDC max) side of your inverter easy and professional. All cables are pre-terminated with large 3/8 inch diameter hole lugs. The kit is Marine grade making it distinct from other products found on the market.Each kit includes:* 400A ANL Fuse* Fuse block with cover* 12" long Red #4/0 cable for fuse connect* Red #4/0 cable at selected kit length* Black #4/0 cable at selected kit length ...

Featuring the hardware required to provide a mounting place for a second solar panel between stanchions Kit includes: 72' long 1" stainless steel tube with SS end fitting drilled bars to attach tube to stanchion U-bolts for attachment to the stanchions tubes Cap nuts to cover U-bolt threads Includes 70W solar panel (SOL50071 skinny solar panel) and 10-2 marine grade wire e Marine includes rubber corner proctectors for all solar panels sold in our kits. These protectors remove the metal corners...

Featuring the hardware required to provide a mounting place for solar panels between stanchions

Need to add a USB power socket on board your boat or RV? This is an excellent kit to solve the problem quickly and easy.  It  mounts on to any flat surface up to 1" thick by simply drilling a 1-1/8" hole.The socket has two USB outlets and is  powered from a 12 VDC source. Included in the kit are  the necessary crimps, fuse holder and fuse required for the installation. Simply add some short pieces of wire and the USB outlet is ready the power of all those energy hungry...

This is a handy must-have device for anybody working with solar panels that utilize MC-4 type connectors. It provides protection for any idle MC4 connector from weather and dirt. Great accessory for winter storage when panels are removed to cap off the feed wires.Sold in Pairs (1 male + 1 female). ** IMPORTANT ** MC4 Connectors not included

Junction Box Kit used with up to 2 solar panels that have flying leads connections instead of the traditional junction box.The kit includes all the components necessary to make your connections into the water resistant enclosure. This eliminates using the factory connectors provided with the solar panel which typically require expensive mating connectors./p>The Junction Box Kit is designed to support the connection of two solar panels together into a single junction box up to...

Torqeedo Lithium Ion 12V 11'  charging adapter cord for cigarette charger socket. Works with Torqeedo Travel 503 & 1003. Part # 2304 ...

Mariners Package with SB2512iX (25A/12VDC/340W Solar) The excellence of the Solar Boost MPPT charge controller is now available in a totally enclosed marine grade package. This package allows for ease of installation, control and cost savings. e Marine has packaged up the Blue Sky Energy's 2512iX or 1524iX  MPPT charge controllers in a simple to install all-inclusive package kit. It features a rugged, non-corrosive enclosure, built-in power circuit breaker (on-off control), expanded easy...

e30 Mariners Package with SB1524iX (15A/24VDC/400W Solar)The excellence of the Solar Boost MPPT charge controller is now available in a totally enclosed marine grade package. This package allows for ease of installation, control and cost savings.e Marine has packaged up the Blue Sky Energy's 2512iX or 1524iX  MPPT charge controllers in a simple to install all-inclusive package kit. It features a rugged, non-corrosive enclosure, built-in power circuit breaker (on-off control), expanded...

Mariners Package with SB1524iX (25A/12VDC/270W Solar)The excellence of the Solar Boost MPPT charge controller is now available in a totally enclosed marine grade package. This package allows for ease of installation, control and cost savings.e Marine has packaged up the Blue Sky Energy's 2512iX or 1524iX  MPPT charge controllers in a simple to install all-inclusive package kit. It features a rugged, non-corrosive enclosure, built-in power circuit breaker (on-off control), expanded easy to...

This is an excellent hookup kit for any 12 or 24 V system to ease installation time and cost. It connects the controller (E 10, E 20, E 30 control panels manufactured by e Marine) to the battery. We included all the necessary components including the wire and fusing to make the connection. The one-stop/shop kit eliminates the need to track down all the unique items to complete the install.55Amps Hookup Kit for e10-e20 Solar and Wind Control PanelsThe Kit includes:- Two 8 AWG #10 hole crimp...

This is an excellent hookup kit for any 12 or 24 V system to ease installation time and cost. It connects the controller (E 10, E 20, E 30 control panels manufactured by e Marine) to the battery. We included all the necessary components including the wire and fusing to make the connection. The one-stop/shop kit eliminates the need to track down all the unique items to complete the install.70Amps Hookup Kit for e10-e20 Solar and Wind Control PanelsThe Kit includes:- Two 6 AWG 5/16" hole crimp...

Solbian 3/8" polypo honeycomb back stiffner support plate for Solbian 80W and Solbian 100W solar panels Dimensions: 213/8" x 431/2" Weight: 4 lbs

Solbian 3/8" polypo honeycomb back stiffner support plate for Solbian 125W solar panelsDimensions: 263/4" x 543/8" Weight: 6.2 lbs

Solbian 3/8" polypo honeycomb back stiffner support plate for Solbian 137W solar panelsDimensions: 213/8" x 59" Weight: 5.4 lbs

8 MM" dual wall polycabonate back stiffener support plate for Solbian 137W solar panels (59.1" x 21.7")

8 MM" dual wall polycarbonate back stiffener support plate for Solbian CP/SP125W solar panels (54.2" x 26.7")

8 MM" dual wall polycarbonate back stiffener support plate for Solbian SL80/SP100L solar panels (43.7" x 21.2")

8 MM" dual wall polycarbonate back stiffener support plate for Solbian CP140 solar panels (60.5" x 26.7")

25 Amp 600 Piv Bridge Rectifier P.I.V. 1 1/8" square.

25 Amp 600 Piv Bridge Rectifier P.I.V. 1 1/8" square.

Replacement option for Germini mounts

Stay Marine Mount Kit for 504, 913 or 914i Rutland Windcharger mast. Includes all hardware to install. (Mast not included).

Mizzen mast front mount. Will work with the Air-X, Air Breeze, Silent Wind  and Rutland 914 wind turbines. Comes complete with hardware.  Once installed, the mounting tang connection bolts allow for easy removal and re-installation of the the wind generator mizzen mount if mizzen mast needs to be removed for service work or transportation. Special order-non stocked item Please allow 4 to 5 weeks for shipping. Please note: due to the way this item ships it is impossible to calculate...