Midnite Solar Combiner Box

MNPV3 Combiner (Enclosure only.Breakers/fuse holders sold separately) This model will accept three 150VDC (MNEPV) breakers or two 600/1000VDC fuse holders. With modifications to the deadfront 3 dinrail fuse holders can be used. Includes a 60 amp plus bus bar, 6 position PV negative bus bar, and a 6 position ground bus bar. Punch out tabs on plastic deadfront make for a clean installation using circuit breakers. An included vsnap in adapter makes for a professional looking installation when...

MNPV6 Combiner  (Enclosure only. Breakers/fuse holders sold separately) This model will accept six 150VDC (MNEPV) breakers or four 600/1000VDC fuse holders.  Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 amp bus bar for fuses.Punch out tabs on plastic deadfront make for a clean installation using circuit breakers.An included vsnap in adapter makes for a professional looking installation when installing fuse...

MidNite Solar 150VDC din rail mount breaker (13mm wide). MNEPV breakers are the same as CBI QY breakers except the standard used is inadequate for the solar industry. MidNite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. All of the NRTL listings still apply.Branch circuit rated 489AMidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.Breakers ordered...

MNPV12 Combiner  (Enclosure only. Breakers/fuse holders sold separately) This Combiner can be configured in 3 ways: A single 10 string combiner for a transformer based inverter 10 positive fuses 2 separate 5 string combiners for 2 transformer based inverters 5 positive and 5 positive fuses A single 5 string transformer less combiner 5 positive and 5 negative fuses This model will accept 12  150VDC (MNEPV) breakers or ten 600/1000VDC fuse holders.  Includes 15 position PV...

Touch Safe Fuse Holder for 10x38mm fuses (sold separately) 1000VDC 30 amp Din rail mountUse in the MNPV combiners for high voltage string inverters. NRTL listed to UL2579.

Barrel Fuse goes with MidNite Solar MNTS fuse holder (sold separately).Designed to be used with solar panels and provides an excellent, low-cost solution for circuit protection.- Industry standard 10mm x 38mm fuses- Rated to 600VDC- NRTL listed to UL2579