Magnum MS2812 2800W 12V Pure Sine Wave Inverter Charger 125A is designed specifically for the most demanding mobile, back-up, and off-grid applications. The MS2812 is powerful, easy-to-use, and best of all, cost effective.
A
Power Factor Corrected (PFC) Charger is built into the inverter/chargers. It uses less energy (25-30% less AC current) from a generator than a standard chargers.
Magnum Inverter Charger MS2812 Installation is easy:
1. Simply connect the inverter’s output to your distribution circuits or electrical panel
2. Connect your utility power cable to the inverter’s easy-to-reach terminal block
3. Connect the batteries
4. Switch on the power
MS2812 Inverter Features and Capabilities
Five Stage Charging Capability
|
|
Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
|
Battery Temperature Compensation
|
|
Yes, 15 ft Battery Temp Sensor standard
|
Overcurrent Protection
|
|
Yes, with two overlapping circuits
|
MS2812 Inverter Specifications:
Input Battery Voltage Range
|
|
9 - 17 VDC
|
Nominal AC Output Voltage
|
|
120 VAC ± 5%
|
Output Frequency and Accuracy
|
|
60 Hz ± 0.1 Hz
|
Continuous Power Output at 25°C
|
|
2800 VA
|
Waveform
|
|
Pure Sine Wave
|
Continuous Output at 25°C
|
|
125 ADC
|
Warranty
|
|
3 Years
(5 Years when installed on MMP or MP system)
|
Operating Temperature
|
|
-20°C to +60°C (-4°F to +140°F)
|
Operating Humidity
|
|
0 to 95% RH non condensing
|
Dimensions
|
|
13.75" x 12.65" x 8.0"
(34.9 cm x 32.1 cm x 20.3 cm)
|
Weight
|
|
55 lbs (24.9 kg)
|
|
|
|
Manufacturer part # MS2812