Magnum Parts & Accessories

The BP-MMP is a single-piece, powder-coated steel back plate designed to accommodate the MMP enclosure, a Magnum inverter, and the inverter hood together; making the complete system appear more seamless. Designed with PEM (i.e. internally threaded) nuts, the back plate is shipped with ten ¼-20 x ¾” Hex head bolts for mounting the MMP enclosure, a Magnum inverter, and the inverter hood. The BP-MMP backplate is also used to provide the necessary requirement to provide a noncombustible mounting...

Magnum Battery Monitor Kit ME-BMK is single battery bank amp-hour meter that monitors and provides important information about the condition of the battery. This information will let you know how much energy you have available, and let you plan your electrical usage to ensure the battery is not being over-discharged. The ME-BMK battery monitor kit is easy to install and is designed to be networked with a Magnum Energy inverter/charger using a remote (ME-RC50 or ME-ARC50) or router (ME-RTR) to...

The MMP – Mini Magnum Panel is an inclusive, easy-to-install panel designed to work with one Magnum MS-AE, MS-PAE, MS, RD or other non-Magnum inverter / charger.Features: Small footprint: only 12.5″ wide x 18″ tall x 8″ deep Money-saving design: not only is the MMP less expensive, but it is pre-wired for fast installation, saving labor costs Easy access: front-mounted breakers and remote (optional) Choices: can be wired for 120 VAC or 120/240 VAC output Inclusive: works with non-Magnum...

Magnum Battery Temperature Sensor (15' or 25' length). This is a must-have accessory for any inverter installation if you want to be assured that your batteries get fully charged to 100%. The temperature sensor communicates with the inverter battery charger to make sure the batteries are not under charged or overcharged based on the battery temperature.Many individuals don't consider this an important aspect of their installation but ultimately this small investment will probably extend your...

Magnum Auto generator start panel Manufacturer Part # ME-AGS-S-R The Magnum AGS is compatible with most major generators, including Onan, Powertech, Generac, Westerbeke, Kohler, EPS, Northern Lights, and most portable generators with electric start. Please check with your Magnum dealer for specific model compatibility. Automatically start your generator: The AGS is designed to automatically start your generator based on low battery condition or the inside room temperature. Manual start and...

The Magnum ME AGSN Automatic Generator Start Network is the 'network' version of Magnum Energy's Automatic Generator Start (AGS) controllers. The version is setup and operated via a Magnum Energy Inverter and ME-RC or ME-ARC remote panel. When using the ME-RC Remote, the ME-AGS-N has basic adjustments starting on battery voltage or temperature. When using the ME-ARC remote, the ME-AGS-N has advanced start and stop settings based on: Time of day, battery State of Charge, battery voltage,...

Magnum ME-ARC50 Remote Control allows to monitor and customize the operating parameters for your Magnum inverter/charger. The Magnum ME-ARC50 advanced remote control can be used on all Magnum inverter/charger models so there is no cross-platform confusion. The ME-ARC50 comes standard with a 50-foot, 4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or inverter is removed). Magnum ME-ARC50 Remote Features: LED...

Magnum ME-ARTR Advanced Remote allows to quickly and easily connect multiple inverter/chargers, charge controllers, and accessories without individual programming. This advanced router is designed to provide system-level connectivity and programming for large Magnum Energy installations.  One ME-ARTR can accommodate up to four MS-PAE or MS-PE inverter/chargers in parallel and program up to seven PT-100 solar charge controllers at once. The advanced router can also handle two...

Magnum ME-RC50 Remote Control is HIGHLY RECOMMENDED with every Magnum Inverter so that the inverter features can be modified and error codes recovered.The Magnum ME-RC50 comes standard with a 50 Foot Cable, twisted-pair 4-conductor telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or inverter is removed).The Magnum ME-RC50 remote control has all of the programming and operation functions...

Magnum MagWeb ME-MW-W Wired Ethernet is a powerful and cost effective tool for remotely monitoring Magnum Energy’s inverters and accessories The MagWeb Wireless system provides live Internet monitoring of the inverter, battery monitor, and automatic generator start module. Using your always on Internet connection, the MagWeb ME-MW-W makes live and historical conditions available to you through a web browser at data.magnumenergy.com. The MagWeb Wireless constantly streams data to your personal...

Magnum ME SSI Series Stacking Interface Kit allows two Magnum MS4024 models to be connected together in a “series stacked” configuration to provide 120VAC and 240VAC outputs. When connected together in a series, the AC output of each inverter continues to provide 120VAC, but the two 120VAC output waveforms are also phase locked and synchronized 180° out-of-phase from each other to provide 240VAC. This is commonly referred to as a 120/240VAC split-phase or as a 240VAC...

Replacement Fan for Magnum Inverters 12V, 52 CFM   Maunufacturer Part No. 44-0004

Been replaced by IVM99110 Tested FET Board for Magnum MS 2000 Inverters (Factory New) Maunufacturer Part No. TFB-MS2000 ** This item is non-returnable/non-refundable. **

Tested FET Board for Magnum MS 2812 Inverters (Factory New) Maunufacturer Part No. TFB-MS2812 ** This item is non-returnable/non-refundable. **

Tested FET Board for Magnum MS 4024 Inverters (Factory New) Maunufacturer Part No. TFB-MS4024 ** This item is non-returnable/non-refundable. **

Tested A/C Board for Magnum ME and MS Series Inverters (Factory New) Maunufacturer Part No. TACB-ME/MS ** This item is non-returnable/non-refundable. **

Tested A/C Board for Magnum MS-PAE Series Inverters (Factory New) Maunufacturer Part No. TACB-MSPAE ** This item is non-returnable/non-refundable. **

Tested A/C Board for Magnum RD Series Inverters (Factory New) Maunufacturer Part No. TACB-RD ** This item is non-returnable/non-refundable. **

Filter Board for Magnum MS Series 12V Inverters Maunufacturer Part No. FB-MS/12 ** This item is non-returnable/non-refundable. **

Filter Board for Magnum MS Series 24V Inverters Maunufacturer Part No. FB-MS/24 ** This item is non-returnable/non-refundable. **

Tested Control Board for Magnum MS-2000 Inverters (Factory New) Maunufacturer Part No. TCB-MS2000 ** This item is non-returnable/non-refundable. **

Tested Control Board for Magnum MS-2012 Inverters (Factory New) Maunufacturer Part No. TCB-MS2012 ** This item is non-returnable/non-refundable. **

Tested Control Board for Magnum MS-2812 Inverters (Factory New) Maunufacturer Part No. TCB-MS2812 ** This item is non-returnable/non-refundable. **

Tested Control Board for Magnum MS-4024 Inverters (Factory New) Maunufacturer Part No. TCB-MS4024 ** This item is non-returnable/non-refundable. **

The MM-R remote control is designed to be simple to install and use. It allows easy control and provides a quick indication of the inverter operation of the MM612 inverter.This remote has an ON/OFF switch that performs the same function as the ON/OFF switch on the front of the MM612 inverter. This remote control also has LED indicators to show the current operating mode of the inverter and to help troubleshoot you system if you have a fault.This remote is recommended for the MM612 inverter...

The MM-RC remote control is designed to be simple to install and use. It allows easy control and provides a quick indication of the inverter and charger operation of the MM Series, MM-AE Series and MMS Series inverter/chargers.This remote has an ON/OFF switch that performs the same function as the ON/OFF switch on the front of the MM Series, MM-AE Series, and MMS Series inverter/chargers. This remote control also has LED indicators to show the current operating mode of the inverter, to help...