Blue Sea

Maxi, Fuse Holder 60Amp, 32 VDC w/ 5\" of #6  flying leads, water tight cover included

Maxi Surface Mount 30-60 Amp MAXI Fuse Block Screw Termination Accepts 18 to 4 AWG Wire Accepts one MAXI fuse from 30 to 80A DC   Manufacturer Part # PN 5006

CLASS-T FUSE BLOCK WITH COVERStainless Steel Stud are 3/8” Studs. Mounting holes accept 1/4" Screws. Fuse Block is rated for up to 160 Volts DC and 400 Amperes. Includes 2 #8 tap screws on each side (Fuse not included). FEATURES Clear insulating cover protects conductive components – satisfies ABYC/USCG requirements Large heat dissipating tin plated copper plates on each side 180 degree access with cover on for 14-4/0 AWG wire • UL94V0 black base resists high heat L 7.0” x W 2.0” x H 2.3”...

Block has 8-32 screw terminals for all fuse outputs and 10-32 threaded studs for mains. Rated for 30 AMP maximum per circuit, 100 AMP Total for the block at 32 Volts. Independent Bus makes for easy connection for return ground. Clear insulating cover has recess for labels and protects condutive parts from accidental contact. Cover also holds 2 spare fuses.

ATC Fuse Holder

Blue Sea 5005 ANL Fuse Block 35-300A Accepts 5/16" (M8) ring terminals For use on systems up to 32 Volts DC Swing out design allows replacement of the fuse without removing fasteners Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact UL 94-V0 base resists high heat Insert molded studs ensure secure fuse mounting Insulating cover satisfies ABYC/USCG requirements Cover breakouts allow wire access in any direction Fuse sold separately...

Block has 8-32 screw terminals for all fuse outputs and 10-32 threaded studs for mains. Rated for 30 AMP maximum per circuit, 100 AMP Total for the block at 32 Volts. Independent Bus makes for easy connection for return ground. Clear insulating cover has recess for labels and protects condutive parts from accidental contact. Cover also holds 2 spare fuses.Features:• Clear insulating cover with label recess for small format Blue Sea Systems™ labels• Cover insulates all conductive parts,...

Cable Clam .83" Provides a waterproof pass-through for antenna cables without requiring removal of the factory installed connector Perfect for antenna installation Waterproof co-axial installation without removing connectors Save the expense of removing and replacing connectors Avoid poor connections from removing factory connectors For use above the waterline only Manufacturer Part # 1002 Specifications Max Cable Diameter 0.44in (11.18mm) Total Diameter 0.83in (21 mm) Body Material Acetal...