The Silentwind-Charge controller HYBRID 1000 is a combined wind and solar charge
regulator with an inbuilt micro-controller. The
HYBRID 1000 was especially developed for the Silentwind Generator and enables
you additionally to install solar panels up to a watt
age of 550 Watt peak or to a max.
current of 40A.
Consumers with a maximum current of 15 Amps that are connected to the deep cycle
output can be automatically switched off or on by a deep cycle protection function.
All operating parameters can be seen on an LCD-display
.
You can adjust the charge regulator with 5 touch keys on
the right and left of the
LCD-display.
A thermally switched vent provides the correct operating temperature.
The Silentwind Generator generates 3phase AC-voltage.
In the charge controller AC
is transformed to DC voltage. 12 or 24 voltage is automatically detected after the first
installation. All types of lead batteries (Gel, AGM and acid) can be charged.
The suitable maximum charge voltage - depending on the
type of battery - must be
adjusted in the Setup.
Technical Data
Hybrid-charge Controller Type
|
HYBRID 1000
|
Battery System Voltage (automatically detected)
|
12 or 24 Volt
|
Max. Power Input of the Wind Generator
|
600 W
|
Max. Current Input of the Wind Generator
|
40A
|
Max. Power Input of the Solar Panel
|
550 Wp
|
Max. Current Input of the Solar Panel
|
40A
|
Max. Open Circuit Voltage Input of the Solar Panel
|
50 VDC
|
Max. Total Charge Current
|
80 A
|
Max. Switch-off Current at LOAD-output (Load)
|
15 A
|
Dimensions (L x W x H)
|
10.63" x 5.12" x 3.15"
270mm x 130mm x 80mm
|
Weight
|
3.31 lbs (1.50 kg)
|
Suitable for (Battery type)
|
acid, gel, and AGM
|
Warranty
|
24 months
|
Features
Thermically switched vent
|
automatically
|
Cable connection
|
screw teminals
|
Integrated electronic brake
|
charge limitation, storm brake
|
Integrated manual brake switch
|
service
|
LCD-display of all relevant working data
|
W, A, V/Ah, Ah
|
External stop switch
|
Plug connector
|