Loading... Please wait...

Categories

Sunforce 600 Turbine Value Kits

  • Image 1
  • Image 2
  • Image 3
  • Image 4
RRP:
$1,175.00
Web Price:
$909.00 (You save $266.00)
SKU:
MKW90150A
Brand:
Weight:
60.00 LBS
Availability:
24-48 Hrs
Shipping:
Calculated at checkout
Sunforce:
Quantity:


Product Description

The Sunforce 600  Marine Wind Turbine is designed for watercrafts and any area in close proximity to salt water. The heavy-duty powder-coating adds enhanced resistance to the effects of the sun, wind, and water. All components have been tested to perform, without degradation under marine conditions.

Our Sunforce 600 is sold with an external MPPT (Maximum Power Point Tracking) controller  that connects directly to the turbine.  When connected it maximizes power produced by optimizing performance (it regulates turbine speed for given wind condition and to squeak out as much power as possible).  The MAXIMUM power rating of the combined system is 450 W, but the over all energy production is significantly enhanced by the MPPT controller.  This is especially advantageous in the low wind speed areas where many boats  typically moore, thereby maximizing the energy harvest (amp-hrs /day).

We have combined the turbine and MPPT controller together  into our popular cost-effective kits to help simplify the installation. these include specialty control panels which work exclusively with the Sunforce 600 turbine.

Turbine and Tower Kit includes:

  • Sunforce 600 Turbine and external MPPT Controller (12 Volt*)
  • Tower Kit (Includes 9' Vibration absorbing polished Alunnimum Mast, SS stays and Mounting Hardware)

Turbine w/e10 Analog

  • Sunforce 600 Turbine and external MPPT Controller (12 Volt*)
  • e10 Control Panel with Analog Meter (Circuit Breaker, Stop/Run Switch, Analog 30A meter all pre-wired onto an attractive control plate)

Turbine w/e10 PEM Meter

  • Sunforce600Turbine and external MPPT Controller (12 Volt*)
  • e10 Control Panel with Power Energy Meter (Circuit Breaker, Stop/Run Switch, Mulit-purpose Digital Power/Energy meter all prewired onto an attractive control plate)

Deluxe Kit

* Please contact us for 24V systems.

These kits will ship in multiple boxes and thus may require extra shipping cost. If your order requires additional shipping we will contact you prior to your order leaving our facility.

More Info

Precision-molded, aerodynamic fiberglass blades ensure quiet performance and minimal vibration. Turbine output is 3 phase AC, reducing power loss over longer wire lengths, that is then converted to DC at the MPPT controller. Microprocessor-based controller provides voltage regulation of the 12V output, peak power tracking, and silent stall control in high winds (see more info below). At sea the increased blade tip angle improves ability of blades to both engage wind at low speeds as well as shifting the point at which blades would typically “flutter” in high winds to a point above the rotational speed allowed by the MPPT controller. In port, hysteresis braking locks the turbine in a silent regulation mode once the batteries are fully charged, preventing the turbine from fluctuating in and out of regulation mode. The result is quieter, more unobtrusive operation both under sail and when docked. The tail-fin of this marine turbine model is designed to better stabilize the unit in marine wind environments.

Turbine specifications:

  • Number of blades: 3
  • Blade diameter: 52"
  • Voltage: 12
  • Watts: 600W Turbine. (450W Turbine & MPPT Controller used together)
  • Cut-in speed: 4mph
  • Overspeed protection: Electronic @ 1400rpm
  • Dimensions: 7"L x 5"W x 10"H

The included Maximum Power Point Tracking (MPPT) charge controller enables the 600 watt marine turbine to achieve its highest possible performance by periodically tracking the maximum power point of the turbine’s output. The controller features a corrosion and water resistant heat sealed casing to insure longevity in the marine environment. MPPT controller output  featuresa temperature-compensated three-stage battery charging regulator.

sunforce marine diagram

  • Charges a single 12 Volt battery bank
  • Designed to perform in low wind speeds Weatherproof Marine Grade Industrial Design
  • Corrosion Resistant Powder Coated Aluminum Cast Body
  • Ideal for Salt Water & Marine Applications Patented Auto-Sensing MPPT (Maximum Power Point Tracking Charge Controller)
  • Auto-sense type of battery
  • Prevents overcharge and discharge of batteries
  • Low noise aerodynamic fiber glass blades
  • 'Do it Yourself' Maintenance free Installation

 

Turbine and Tower Kit includes:

Sunforce 600 Watt Turbine

Tower Kit



Turbine w/e10 Analog

Sunforce 600 Watt Turbine

e10 Analog Meter



Turbine w/e10 PEM Meter

Sunforce 600 Watt Turbine

e10 w/PEM Meter



Deluxe Kit

Sunforce 600 Watt Turbine

Tower Kit

e10 w/PEM Meter

40 feet 10-3 wire

 

Relevant Documents:
PDF
Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Get Discounts and Special Offers

Email:

Save $100's on wind turbines, solar panels and accessories.

Related Products

You Recently Viewed...