ga('send','pageview');
Price: $246.48
SKU: MTS10200
Brand: CruzPro
    Shape:

    Update price
    Quantity:

    CruzPro FU60 Fuel Consumption Computer Fuel Gauge displays fuel remaining in gallons, liters or percent (0-100%) in tenths, fuel used (gallons or liters), and fuel consumption rate (gallons/hour or liters/hour). The CruzPro FU-60 digital fuel gauge is a plug-in replacement for your regular analog fuel gauge. No need for special flow sensors.

    The FU60 works with your standard fuel sender manufactured by Centroid, Aerotech, VDO, Teleflex, Faria, GM, Stewart-Warner and others to compute fuel remaining and fuel consumption rate. It accurately computes fuel remaining even if you have odd shaped tanks (such as often found in boats).

    Low and High fuel alarms can be set over the entire range of the instrument/sender. When activated, the FU60 built-in 85 dB alarm will sound and the display will flash. The alarm can be enabled or disabled with a single key press. Five levels of backlighting can be selected and all set-up, calibrations constants, alarm values, and sender calibration is saved to non-volatile memory.

    Whereas standard analog fuel gauges are notoriously inaccurate, the FU60 \"learns\" the shape of your tank and eliminates sender errors and nonlinearity. Another source of errors is varying battery voltage. The readings for standard analog fuel(or oil pressure and water temperature) gauges vary as your battery voltage changes. The readings can actually change 30% or more as your battery voltage varies from 11V to 14V. Intelligent CruzPro gauges regulate the battery voltage and send a highly regulated and temperature compensated voltage to your sender that prevents fluctuations due to battery voltage. This ability for CruzPro gauges to learn your system errors and make them battery voltage independent provides an accuracy not available before and allows for a true fuel reading over the entire range from full to empty. Never worry about running out again.

    With a press of the button you can display fuel remaining (in gallons, liters or %), fuel used, fuel consumption rate and low fuel alarm set-point. The FU60 draws only 0.017 amps and 5 levels of backlight (including OFF) can be selected from the front panel and is saved to non-volatile memory. The FU60 outputs fuel remaining and fuel consumption rate on the standard NMEA 0183 serial data line at 4800 BAUD. This ASCII information can be used to log performance, repeat the display information at a remote location (see www.cruzpro.com/rp30.html ) or for use with the CruzPro SEAviz virtual instrumentation software running under Windows on your computer (see www.cruzpro.com/seaviz.html). If NMEA 0183 serial data is not required, then the output terminal can be programmed as an external alarm output pin.

    FU60 Fuel Gauge Specifications:

    • Operating Voltage: 9.5 - 33.0 VDC
    • Current Drain: 0.018 amps nominal
    • Accuracy: Better than 2% (trainable)
    • Display: 4 digit LCD, 5 levels of backlighting
    • Data: Fuel remaining, trip fuel, total fuel used, consumption rate (gal/liters per hour)
    • Inputs: Works with all popular fuel senders, both American and European standards (Centroid, Faria, GM, VDO, Teleflex, Stewart-Warner, etc.)
    • Data Output: NMEA 0183 serial 4800 BAUD Alarms:
    • Built-in 85 dB audible alarm. Settable Low and High fuel alarms External Alarm Output:: NMEA 0183 serial data output can be programmed as an external alarm output
    • Size: 2.5\" dia X 4.1\" deep (61mm x 104mm)
    • Mounting: 2-1/8\" (55mm) round hole

    Model #:

    FU-60R Round

    FU-60S Square

     

    CruzPro FU60 Information:
    Airdolphin Pro 48V Brochure CruzPro FU60 Manual