Solar Panel Mounting Hardware

Specification The ABS solar mounting bracket can be used with any aluminium framed solar panel to provide a secure fixing for vehicles, caravans, boats, outbuildings etc. The mounts will support the solar panel at the optimum height above the surface to enable aeration from underneath, ensuring the solar panel functions as efficiently as possible. Installation The brackets are first be screwed or bolted to the solar module using suitable stainless steel self-tapping screws. You will need to...

SpecificationThe ABS solar mounting bracket can be used with any aluminium framed solar panel to provide a secure fixing for vehicles, caravans, boats, outbuildings etc. The mounts will support the solar panel at the optimum height above the surface to enable aeration from underneath, ensuring the solar panel functions as efficiently as possible. InstallationThe brackets are first be screwed or bolted to the solar module using suitable stainless steel self-tapping screws. You will need to...

SpecificationThe ABS solar mounting bracket can be used with any aluminium framed solar panel to provide a secure fixing for vehicles, caravans, boats, outbuildings etc. The mounts will support the solar panel at the optimum height above the surface to enable aeration from underneath, ensuring the solar panel functions as efficiently as possible. InstallationThe brackets are first be screwed or bolted to the solar module using suitable stainless steel self-tapping screws. You will need to...

Gemini Side Mounts were developed to provide a range of connections for grab rails and attachments on dodgers and biminis. Sliding mounts provide a cleaner look at a lower cost. Split type mounts, since they can be placed anywhere on a frame, allow a broader range of applications.

Sold in sets of 4. Anodized aluminum Z shapped bracket with multiple hole for easy mount of solar panels.

Gemini Side Mounts were developed to provide a range of connections for grab rails and attachments on dodgers and biminis.   Sliding mounts provide a cleaner look at a lower cost.  Split type mounts, since they can be placed anywhere on a frame,  allow a broader range of applications.

Set of 4 black rubber Solar Panel Corner Protector. Fasternes not included. It protects you from accidental cuts from the sharp corners.

Quick and easy adjustable tilt solar mounting kit.  For use on solar panel up to 180W.  Excellent solution for quickly mounting solar panel on a flat surface that needs to be angled.  Easily adjustable and can be quickly put into a flat position using thumbnail hardware.  Excellent for installation on an RV, cabin, or garage roof.  Recommended only for installation on RVs and land installations.  Not recommended for use in marine installations. Part # SLB-0103 RV...

Smaller Solar PV Modules    Universal "Z" Mount Brackets Attaches to any solar module frame, perfect for curved or irregular surfaces. Kit includes four (4) Anodized Aluminum Z brackets and four (4) stainless steel bolts.

GEMINI 1"  Stainless Steel Concaved Post Mount Part # GEMCON-1-P

1 inch Stainless Steel Take-Apart Jaw Slide

Stainless Steel U-bolt Perfect for clamping onto a 1" stainless steel Bimini or stanchion pipe on board your vessel. Features a 1/4-20 thread with 1" ID and comes with to stainless steel nuts. Overall length is 2". Sold individually.

Stainless Steel Cap Nut for use with  1/4-20 bolt thread

Adjustable Panel Support - used in our stanchion mounting kits to hold in place the solar panel once the pivot angle has been set. Also useful for other functions onboard a boat where temporary support is needed.  Length can be adjusted from 24" to 47"

Stainless Steel End Cap for 1" Tube (each).  Push in friction ears  hold-in-place.  No tools required.

316 Grade Stainless Steel Tube 1\" Tube, 8' in length.

1" rail clamps (sold as set of 2).  These are a great hardware product for mounting almost any item to a 1 inch stainless steel rail that might be on your boat. They clamp on using a slotted captive screw and secure to your item with three mounting holes (#8).   Rail Clamp Spacer is also available.  For more information click here.

• Quick mount clamps require no holes to be drilled in railings for installation• Clamps mount to the railings simply by tightening the wing nut• Fits any .75", 1" OR 1.25" railings• Quick release design allows items to be quickly and easily removed for storage• Use for all sorts of accessory installations, including glass racks, binocular holders, bottle holders, and other similar items• Two (2) per package Clamp dimensions are 4" x 1.5" x 1.5"   Rail Clamp Spacer is also...