ga('send','pageview');

Products 1-23 of 23
Show
1.9" Curved Pipe Stand-Off Kit Curved Pipe Stand-Off Kit
Price: $79.00
View
Availability: Back Order
e Marine Item #: HW20230 -

Kit includes: Two Curved Washer for 1 1/2" Pipe Two 1 3/8 x 4 Delrin Spacer Two 3/8-16 x 8" SS Threaded Rod Two 3/8-16 SS Cap Nut Two 3/8-16 SS Nylon Locknut Two 3/8 SS Flat Washer Two 3/8 Nylon Shoulder Bushing Two 3 1/2" Backup Plates

12-24 VDC Fan Variable Speed Controller Fan Variable Speed Controller
Price: $58.00
View
Availability: Back Order
Item #: EPE 20940A -

Solid-state DC fan controller. Excellent for varying the speed of DC fans to control the amount of airflow. Will work on Fans from 12 to 24 VDC, rated up to 6 Amps. Rotary adjustment to vary the speed 0 -100%. Removable input terminal block makes wiring snap. Connection points for input and output wires are clearly marked. Dimensions: 3.5"(L) x 2.35" (W) x 2.25" (H) (including knob). Mounting holes on 1.6" x 3.1" centers

CableClam 0.83"
Price: $19.00-$29.50
View
Availability: Back Order
Blue Sea Item #: EPE 20010 -

Cable Clam .83" Provides a waterproof pass-through for antenna cables without requiring removal of the factory installed connector Perfect for antenna installation Waterproof co-axial installation without removing connectors Save the expense of removing and replacing connectors Avoid poor connections from removing factory connectors For use above the waterline only Manufacturer Part # 1002 Specifications Max Cable Diameter 0.44in (11.18mm) Total Diameter 0.83in (21 mm) Body Material Acetal...

Curved Washer for 1.5" Schedule 40 Pipe Curved Washer for 1.5" Schedule 40 Pipe, curved washer, schedule 40 pipe
Price: $25.08
View
Availability: Back Order
e Marine Item #: HW20200 -

These are designed to fit a 1.5" schedule 40 pipe.  A 3/8" through hole in the center. It is made of anodized aluminum.  Bright dip anodized to a marine grad standard.

Marinco 3 Wires Plug & Receptacle Marinco, 12VCP, Trolling Motor,  Plug & Receptacle
Price: $48.50
View
Availability: Back Order
Marinco Item #: EPE 20070 -

The ConnectPro system has superior electric current carrying capacity that eliminates problems that rob motors of power and reduce battery life.  The ConnectPro system has features not found on other trolling motor connections: Exclusive Marine-grade turn locking connection Weather resistant seals and covers safeguard electrical contacts from water and corrosion Universal design works with 12, 24, 12/24, 24/36, 36 Volt combinations Accepts up to 8 Gauge wire Works for any 2 or 3 wire...

GEMINI SS Sliding Split Jaw Side Mount Sliding Split Jaw Side Mount
Price: $30.75-$35.95
View
Availability: In Stock
Gemini Item #: MHE95571 -

Gemini Side Mounts were developed to provide a range of connections for grab rails and attachments on dodgers and biminis. Sliding mounts provide a cleaner look at a lower cost. Split type mounts, since they can be placed anywhere on a frame, allow a broader range of applications.

Z Mount Solar PV LGR Bracket (Set of 4) Z Mount Solar PV LGR Bracke
Price: $22.00
View
Availability: Back Order
Item #: MKS10203 -

Sold in sets of 4. Anodized aluminum Z shapped bracket with multiple hole for easy mount of solar panels.

GEMINI SS  Sliding Side Mount Sliding Side Mount
Price: $38.50-$42.75
View
Availability: Back Order
Gemini Item #: MHE95570 -

Gemini Side Mounts were developed to provide a range of connections for grab rails and attachments on dodgers and biminis.   Sliding mounts provide a cleaner look at a lower cost.  Split type mounts, since they can be placed anywhere on a frame,  allow a broader range of applications.

Z  Mount Solar PV  SM Brackets (Set of 4)
Price: $20.00
View
Availability: Back Order
e Marine Item #: MKS10201 -

Smaller Solar PV Modules    Universal "Z" Mount Brackets Attaches to any solar module frame, perfect for curved or irregular surfaces. Kit includes four (4) Anodized Aluminum Z brackets and four (4) stainless steel bolts.

1" GEMINI Concaved Fork Mount - Stainless Steel Concaved, 1" Fork Mount, Stainless Steel Fork Mount, Gemini, GEMCON-1-F
Price: $21.75
View
Availability: Back Order
Gemini Item #: MHE95576 -

GEMINI 1"  Stainless Steel Concaved Fork MountPart # GEMCON-1-F

1" GEMINI Concaved Post Mount - Stainless Steel Concaved, 1" Post Mount, Stainless Steel Post Mount, Gemini, GEMCON-1-P
Price: $25.40
View
Availability: Special Order
Gemini

GEMINI 1"  Stainless Steel Concaved Post Mount Part # GEMCON-1-P

1"  Stainless Steel Take-Apart Jaw Slide Jaw Slide, Take-apart Jaw Slide
Price: $26.00
View
Availability: Back Order
e Marine Item #: MHE95500 -

1 inch Stainless Steel Take-Apart Jaw Slide

GEMINI Drill Guide
Price: $51.80
View
Availability: Back Order
Gemini Item #: EPE30205 -

Uses 9/64 drill bit for #8 screw or fastener   Features: Swing-open design, drill on installed frames, on radiused corners, anywhere.  Large knurled brass thumbscrews for a sure grip. Tool steel drill bushing for lifetime use. Rugged cast bronze body will not mar tubing. Applications: Drill stainless tubing easily Install fasteners of all types Add padeyes for tensioning straps Replace set screws with secure fasteners ...

MC4 Tool
Retail: $4.99
Price: $4.50
View
Availability: Back Order
Solarland Item #: EPE54500 -

This is a handy must-have tool for anybody working with solar panels that utilize MC-4 type connectors. Dual fork allows for easy release of connectors once the connectors have been engaged while the opposite end is used to help tighten down connector bushings. Made of nonmetallic material which makes them very durable in a Marine or wet environment.  Sold in Pairs.

SS U-Bolt 1/4-20 x 1" ID
Price: $4.50
View
Availability: Back Order
e Marine Item #: MHE94500 -

Stainless Steel U-bolt Perfect for clamping onto a 1" stainless steel Bimini or stanchion pipe on board your vessel. Features a 1/4-20 thread with 1" ID and comes with to stainless steel nuts. Overall length is 2". Sold individually.

SS Cap Nut for 1/4 -20 bolt (each)
Price: $0.70
View
Availability: Back Order
e Marine Item #: MHE94510 -

Stainless Steel Cap Nut for use with  1/4-20 bolt thread

Adjustable solar panel support Adjustable Solar Panel Support Pole, 47" pole
Price: $37.60
View
Availability: Back Order
e Marine Item #: MHE94770A -

Adjustable Panel Support - used in our stanchion mounting kits to hold in place the solar panel once the pivot angle has been set. Also useful for other functions onboard a boat where temporary support is needed.  Length can be adjusted from 24" to 47"

Stainless End Cap for 1"  Tubing (each)
Price: $4.00
View
Availability: Back Order
e Marine Item #: MHE94610 -

Stainless Steel End Cap for 1" Tube (each).  Push in friction ears  hold-in-place.  No tools required.

316 Stainless Tubing 8 foot
Price: $72.00
View
Availability: Back Order
e Marine Item #: MKW01131A -

316 Grade Stainless Steel Tube 1\" Tube, 8' in length.

1" Rail Clamps (Pair)
Retail: $29.00
Price: $24.75
View
Availability: In Stock
e Marine Item #: MHE94700 -

1" rail clamps (sold as set of 2).  These are a great hardware product for mounting almost any item to a 1 inch stainless steel rail that might be on your boat. They clamp on using a slotted captive screw and secure to your item with three mounting holes (#8).   Rail Clamp Spacer is also available.  For more information click here.

Adjustable Rail Clamps
Price: $29.20
View
Availability: Back Order
Marinco Item #: MHE94715 -

• Quick mount clamps require no holes to be drilled in railings for installation• Clamps mount to the railings simply by tightening the wing nut• Fits any .75", 1" OR 1.25" railings• Quick release design allows items to be quickly and easily removed for storage• Use for all sorts of accessory installations, including glass racks, binocular holders, bottle holders, and other similar items• Two (2) per package Clamp dimensions are 4" x 1.5" x 1.5"   Rail Clamp Spacer is also...

MC4 Terminator Caps
Price: $5.50
View
Availability: Back Order
e Marine Item #: EPE54506A -

This is a handy must-have device for anybody working with solar panels that utilize MC-4 type connectors. It provides protection for any idle MC-4 connector from weather and dirt. Great accessory for winter storage when panels are removed to cap off the feed wires. Sold in Pairs (1 male + 1 female). ** IMPORTANT ** MC4 Connectors not included

3/4" Hex Bolt option for Germini Mount Stainless Steel 3/4", Hex Bolt, Germini Mount, Stainless Steel
Price: $1.00
View
Availability: Back Order
e Marine Item #: HW30002 -

Replacement option for Germini mounts